 |
| Filter Sampling Accessories |
 |
Filter Supports
| Diameter |
Spacer Material |
Qty. |
Cat. No. |
| 25 mm |
Cellulose Pad |
100 |
225-28 |
| 37 mm |
Cellulose Pad |
100 |
225-27 |
| 500 |
225-2700 |
| 25 mm |
Porous Plastic Pad |
100 |
225-2901 |
| 37 mm |
Porous Plastic Pad |
100 |
225-2902 |
| 37 mm |
Stainless Steel Screen, 100 mesh |
1 |
225-26 |
| 37 mm |
Spacer Ring for methods that do not allow a complete pad
(eg: NIOSH 5506 and 5515) |
25 |
225-23 |
SURE-SEAL™ Leak-free Filter
Cassette Blanks
|
SKC SURE-SEAL leak-free-certified cassettes eliminate sample
bypass and plastic-to-plastic leakage for the most accurate sampling. Through
precision molding and a rigorous in-process quality assurance program, cassettes
are produced that will not leak under vacuum. SKC offers SURE-SEAL
leak-free-certified cassettes packaged with cassette parts assembled. Just look
for the "LF" at the end of the catalog number. Also available are economical
standard cassettes (unassembled) in bulk packaging. |
| SKC certifies cassettes as leak-free if cassettes can retain
a constant vacuum (24 inches of mercury) with a less than 1 inch of mercury
decay per 30 seconds and a constant pressure (5 PSI) with decay of less than 1
PSI per 30 seconds. |
| Diameter |
Cassette Description |
Qty. |
Cat. No. |
| 25 mm |
2-Section, Clear Styrene |
50 |
225-2-25LF |
| 25 mm |
3-Section, Clear Styrene |
50 |
225-3-25LF |
| 37 mm |
2-Section, Clear Polystyrene |
10 |
225-2LF |
| 50 |
225-2050LF |
| 37 mm |
3-Section, Clear Polystyrene |
10 |
225-3LF |
| 50 |
225-3050LF |
Standard Filter Cassette
Blanks
| Diameter |
Cassette Description |
Qty. |
Cat. No. |
| 25 mm |
3-Section, Clear Polystyrene |
50 |
225-3-25 |
| 25 mm |
3-Piece, Carbon-filled, includes cowl and stand
(Cassette used in 225-321) |
50 |
225-3-23 |
| 37 mm |
2-Section, Clear Polystyrene |
10 |
225-2 |
| 50 |
225-2050 |
| 37 mm |
3-Section, Clear Polystyrene |
10 |
225-3 |
| 50 |
225-3050 |
| 37 mm |
2-Section, Opaque Polystyrene |
50 |
225-4 |
| 37 mm |
3-Section, Black Conductive Plastic |
50 |
225-309 |
| 37 mm |
3-Section, Solvent-resistant Polypropylene |
10 |
225-45 |
Filter and Cassette Holders
| Diameter |
Cassette Description |
Qty. |
Cat. No. |
| 13 mm |
2-Section, Polypropylene (Swinnex®) |
|
10 |
225-32 |
| silicon gaskets |
100 |
225-3201 |
| 13 mm |
2-Section, Stainless steel (Swinny®) |
1 |
225-33 |
| 25 mm |
2-section, in-line, Delrin (acetal resin) with stainless steel support
screen |
 |
6 |
225-1109 |
| 25 mm |
Open-face, Delrin (acetal resin) with stainless steel support screen |
 |
6 |
225-1107 |
25 mm
or
37 mm |
Filter cassette holder |
 |
1 |
225-1 |
| 47 mm |
Aluminum with stainless steel support screen, in-line |
 |
1 |
225-4701 |
| 47 mm |
Polycarbonate with polysulfone support, in-line |
 |
1 |
225-4702 |
| 47 mm |
Stainless steel with stainless steel support screen, in-line |
 |
1 |
225-4703 |
| 47 mm |
Aluminum, open-face |
 |
1 |
225-4704 |
| Plastic cap, protects after sampling |
 |
1 |
225-4705 |
| 47 mm |
Teflon (PFA) filter holder with 1/4-in ferrule nuts & wrench set.
for optimum seal SKC recommends Teflon (PTFE) filters. Alternative filter
materials may result in some leakage |
 |
1 |
225-1712 |
Accessories for Filter Sampling
| Description |
Qty. |
Cat. No.
|
Cassette Shrink Bands,
Shrink bands provide a smooth writing surface for sample identification and
prevent tampering |
37 mm |
100 |
225-25 |
| 1000 |
225-25A |
| 25 mm with cowl |
100 |
225-2503 |
| 1000 |
225-2503A
|
Cassette Opener,
EZ opener separates cassette parts and is suitable for both 25 and 37 mm
cassettes. |
|
1 |
225-13-5 |
Petri Dish Slide,
this storage container accepts filters up to 47 mm. Its rectangular base fits
most microscope stages. |
|
100 |
225-2-01 |
Adapters,
Luer taper connects to 1/4 inch tubing connects to 1/4 inch tubing |
PVC |
10 |
225-13-2 |
|
Nickel-coated brass
|
10 |
225-13-3 |
Tubing, Collar Clip and Cable Tie,
Contains a 30-inch (76.2 cm) length of Tygon tubing and one alligator collar
clip attached to a nylon cable tie.
Collar Clip and Cable Tie only |
|
10 |
225-13-8 |
| 10 |
225-13-6 |
Forceps,
Precision stainless steel device speeds removal of filter from cassette and
prevents damage to membrane. |
|
1 |
225-13-1 |
Filter Lifter,
this stainless steel device speeds removal of filter from cassette and prevents
damage to membrane. |
|
1 |
225-13-7 |
Multi-purpose Calibration Chamber,
provides convenient calibration when using a Button Sampler, GS Cyclone, PUF
tube, OVS tube, the IOM, or the PEM. Instead of packaging four or five different
calibration adapters for the field, pack only one Multi-purpose Calibration
Chamber. The rugged 32-oz polypropylene jar contains a quick screw cap and
barbed fitting for easy use.
Large Multipurpose Calibration Chamber,
supports 8 inch long x 3.25 inch diameter devices. |
|
1 |
225-111 |
| 1 |
225-112 |
|
|
