Click on a link below to learn more about Particulate Samplers, Dust samplers, Cyclones, and IOMs from SKC. For a comparative overview, see the particle size-selective sampling guide.
For our complete listing, see our online catalog section containing particle
size-selective samplers here.
 |
The SKC Aluminum Cyclone is a lightweight respirable dust sampler that is
used with a filter loaded into a three-piece filter cassette. The SKC cyclone
gives sharp size selection between respirable fractions at 4 or 5 µm.
|
|
 |
The GS-3 Cyclone is a 10 mm, lightweight, 2-piece conductive plastic unit
that holds a standard 37 mm filter cassette for collecting respirable dust
particles. The GS-3 cyclone is designed to meet the ACGIH/CEN/ISO Curve.
|
|
 |
The GS-1 Cyclone, a single-inlet version of the GS-3 Cyclone, provides
performance equivalent to the Dorr-Oliver Cyclone, but has the added advantage
of being constructed of conductive plastic.
|
|
 |
The SKC Conductive Plastic Cyclone is a small and lightweight conductive
plastic unit that is used with a reusable 25 or 37 mm conductive plastic filter
cassette. The SKC cyclone gives sharp size selection between respirable
fractions at 4 or 5 µm. |
|
 |
The SKC Button Aerosol Sampler is a reusable filter sampler with a porous
curved-surface sampling inlet designed to improve the collection characteristics
of inhalable dust. The SKC Button Sampler meets the ACGIH/ISO sampling criteria
for inhalable particulate mass.
|
|
 |
SKC has combined the sampling efficiency of the patented BUTTON Sampler for
inhalable dust with the protection of a specially designed shield to create the
SKC Abrasive Blasting Sampler for Heavy Metals. The SKC Abrasive Blasting
Sampler for Heavy Metals has been used to monitor the personal exposure of
workers performing abrasive blasting at four U.S. Military facilities. |
|
 |
The IOM sampler is a reusable filter cassette with a sampling head designed
to better measure the worker's exposure to total airborne particulates.
|
|
 |
The personal-size Sioutas Cascade Impactor
separates and collects airborne particles in five size ranges. he Sioutas
Impactor is highly efficient at collecting particles without the use of
impaction grease or substrate coatings and at retaining labile compounds for
size-fractionated chemical analysis. |
|
|
|
the IOM Sampler with MultiDust Foam Discs and a sterilized polycarbonate
filter has been determined to be an effective, low-cost method for collecting
bioaerosols. |
|
 |
The Personal Environmental Monitor (PEM) is a lightweight, personal sampling device for collecting particulates of either 2.5 or 10 µm aerodynamic equivalent diameter. |
|
 |
The SKC IMPACT single-stage inertial impactor is designed for the efficient collection of PM10 or PM2.5 in ambient air. A sampling pump operating at 10 L/min draws PM through the impactor; larger particles are captured on a disposable pre-oiled impaction substrate while smaller particles collect on a 47-mm filter. |
|
 |
The Most Portable 10 L/min Ambient PM10 Sampling
System Available. SKC has brought portability, cost effectiveness,
and ease of use to ambient PM10 sampling with the SKC Deployable
Particulate Sampler (DPS) System.
SKC has combined its fully programmable Leland Legacy® Sample Pump
with the DPS-10 Impactor and sampling accessories to create this convenient
turnkey system.
|
|
 |
The VersaTrap® sampling cassette is a unique sampling device specifically
designed for the rapid collection and analysis of a wide range of airborne
aerosols.
VersaTrap® Sampling Cassette
Product Data Bulletin PDF |
|
 |
sampling equipment that meets the requirements of NIOSH 5040 or MSHA
specifications for sampling Diesel Particulate Matter (DPM).
SKC DPM Cassette Operating
Instructions PDF |
